speedwave XPERT – Microwave Pressure Digestion System
plus d'imagesDescription
Sample preparation at the highest level
- Reliable digestions thanks to innovative sensor technologies
- Outstanding lifetime of vessels
- Maximum safety and increased user comfor
Microwave-assisted pressure digestion is used as a sample preparation technique for reliable elemental analysis in routine and research laboratories alike. speedwave XPERT is a universally applicable microwave digestion system for the preparation of organic and inorganic sample materials that impresses with its reliability, safety, and economy.
Reliable, durable, and economic
speedwave XPERT sets new standards with its innovative sensor technology and high-quality components. Real-time temperature and pressure monitoring takes place contactless for all vessels, which can be removed individually after digestion. The vessels of speedwave XPERT have an outstanding lifetime of up to 10,000 digestion cycles. Low material wear and protection of the vessels against damage by optical pressure and temperature control also ensure that you can significantly reduce your running costs in sample preparation.
- No cross-contamination due to minimal surface porosity of TFM-PTFE vessels
- Homogenous distribution of microwave radiation due to the round design of the oven chamber
- Permanent pressure and temperature control by optical sensors
Maximum Operational Safety and High Application Variety
Working under demanding conditions requires an absolutely reliable system. The pressure-resistant furnace with an electrically locked swiveling lid is equipped with an integrated exhaust system to prevent reaction gases from escaping. The furnace chamber is permanently ventilated. To reduce safety risks from irregular heating, a monitoring of the reaction parameters pressure and temperature is of particular importance. Thanks to real-time monitoring of the internal vessel pressure automatic regulation and, if necessary, shutdown of processes, takes place in case of exothermic reactions.
- Top-loading concept and electronic lid lock
- Permanent ventilation of the oven chamber and removal of generated acid fumes by the fume collection system
- Automatic regulation in case of exothermic reactions
The speedwave XPERT vessels are manufactured with the highest quality standards. They are made from high quality TFM-PTFE and impress through reliability and an outstanding lifetime. Vessel volumes cover a wide range, from 40 to 100 mL. You can choose between four vessel options, offering maximum flexibility for digestions up to 260 °C and 100 bar. The vessels comprise only few individual parts. They are opened and closed manually and without additional tools. When the vessels are opened, the remaining pressure is released safely and controlled. All vessels are equipped with a rupture disc, which breaks when the overpressure exceeds the tolerance level. This allows an immediate termination of the digestion run in case of exothermic reactions. Thus, expensive consequential damage is avoided. Additional liner systems expand the field of applications of existing vessel types. The vessels can be equipped with inserts to support digestion of small sample quantities or complex samples.
Pressure monitoring (Optical Pressure Control OPC) involves optical detection of the internal vessel pressure. The patented technology uses a glass ring, on which the internal pressure acts as a sensor element. Increases in pressure are reflected by changes to the optical characteristic of the glass. The sensor element located in the screw cap of the digestion vessel records these changes and shows the pressure individually for each sample. The optical detection of the vessel surface temperature (Optical Temperature Cut-Off OTC) increases safety and lifetime of the digestion vessels and allows for an individually programmable upper temperature limit. The optical detection of each sample temperature (Direct Infrared Control DIRC) is a patented temperature measurement process, here as well, an infrared thermometer is used for contactless control in all vessels instead of just one reference vessel. Thanks to the optical pressure control in every vessel, exothermic reactions are detected early and the process is automatically regulated or stopped by speedwave XPERT.
- Real-time monitoring
- Minimization of the risk of contamination
- Easy handling
The innovative design of speedwave XPERT builds a connection of convenience and function. A special feature of the microwave digestion system is its top-loading concept. The swiveling lid allows the vessels to be easily loaded from above, providing optimal operator comfort. speedwave XPERT can be operated via a 7" touch controller with a graphical user interface, as well as via mobile devices or PC/laptop.
Données techniques
Technical Data
speedwave XPERT – Microwave Pressure Digestion System | Dimension (width x depth x height) |
---|---|
Order number: 819-5005000-2 | 880 mm x 645 mm x 480 mm |
Logiciel
speedwave XPERT can be operated via a 7" touch controller
with a graphical user interface, as well as via mobile devices or PC/laptop.
speedwave XPERT Software – pre-installed standard software for full control included, for 21 CFR part 11 compliance please select 819-5005011
Product | Required | Included |
---|---|---|
speedwave XPERT - Microwave Pressure Digestion System (819-5005000-2) | ✓ | ✓ |
Accessoires
Accessories and Consumables
Accessory | Order number |
---|---|
Concentration/Evaporation unit for CX 100 | 819-5004820-0 |
Turntable ring speedwave XPERT – | 819-5005148 |
CX 100 Opening station | 819-5303625-0 |
|
|
Forming tool CX 100 | 819-5302026-0 |
Forming tool PL 100 | 819-5303751-0 |
Forming tool PM 40 | 819-5303437-0 |
Forming tool PM 60 | 819-5014612-0 |
|
|
speedwave XPERT Start DAP60X samples – | 819-5005060 |
speedwave XPERT Start DAK100X samples – | 819-5005100 |
speedwave XPERT Start DAK100X OPC-samples – | 819-5005101 |
speedwave XPERT Start DAP100X OPC-samples – | 819-5005103 |
speedwave XPERT Start DAP100X samples – | 819-5005102 |
speedwave XPERT Start DAP40X samples – | 819-5005040 |
speedwave XPERT Start DAP60X OPC-samples – | 819-5303277-0 |
* necessary to operate
Consumables
Order number | Name |
---|---|
Rupture disc Special for PM 60 vessels, 50 bar, | 419-5303740-0 |
Cap for CX 100-vessel with pressure control | 819-5004780-0 |
Cap for PM 40 vessel | 819-5003790-0 |
Cap for vessels | 819-5003580-0 |
Cap insert for closure caps | 419-5303567-0 |
PM 40 Cap | 419-5303433-0 |
Cap insert for closure caps CX 100 | 419-5304707-0 |
CX 100 Vessel complete | 819-5004720-0 |
CX 100 Vessel complete RPM | 819-10000002-0 |
CX 17 Insert made of TFM, 17 ml | 419-5303283-0 |
CX 17 pressure jacket | 419-5303282-0 |
CX 17 Spacer ring made of PTFE | 419-5303428-0 |
Cap insert for closure caps CX-100 | 819-5304763-0 |
Enlargement insert CX 100 | 819-5303277-0 |
Enlargement insert PH 30 | 819-5303661-0 |
Enlargement insert PL 100 | 819-5303299-0 |
Enlargement insert PM 60 | 819-5303278-0 |
Fixation screw for lip seal ring | 419-5302963-0 |
Forming System 6-fold CX 100 | 819-5303386-0 |
Forming System 6-fold PL 100 | 819-5303275-0 |
Forming System 6-fold PM 60 | 819-5303385-0 |
Forming system TOPwave | 819-5303245-0 |
Prisma RPM Glass prism for closure caps | 419-5303573-0 |
CX 100 Glass-Ring for closure caps CX 100 | 419-5304882-0 |
Knurled nut for exhaust tube | 419-5004110-0 |
Lid for CX 100 | 419-5308060-0 |
CX 17 Lid for CX 17 made of TFM, | 419-5303485-0 |
Lid for PH 30 | 419-5709024-0 |
Lid for PL 100 | 419-5300005-0 |
Lid for PM 60 made of TFM, | 419-5014617-0 |
Lid for QX 20 / QX 22 | 419-5014420-0 |
Lid for QX 20 / QX 22 | 419-5014414-0 |
CX 100 Liner insert for pressure vessel CX 100 | 419-5303287-0 |
Lip-seal ring for the gas collection system | 419-5302962-0 |
Marble granulate for evaporation unit | 419-5014622-0 |
O-Ring RPM 25 x 3 mm for closure caps | 419-5306386-0 |
O-Ring RPM (Viton) | 419-5304101-0 |
PEEK-Rung nut for CX 100 closure cap | 419-5303296-0 |
PL 100 Vessel complete | 819-5003630-0 |
PL 100 Vessel complete RPM | 819-5003632-0 |
Lid for PM 40 made of TFM, set of 10 pieces | 419-5303446-0 |
PM 40 Vessel complete | 819-5003270-0 |
PM 60 Vessel complete | 819-5003560-0 |
PM 60 Vessel complete RPM | 819-5003559-0 |
Polarisation foil for prism RPM, set of 24 pieces | 419-5303588-0 |
PTFE Adapter piece CX 17 in PL 100 | 419-5303389-0 |
QX 20 Centring sleeve made of PTFE | 419-5014433-0 |
Knurled screw for closure caps | 419-5303571-0 |
Rupture disc for CX 100 made of Titanium, | 419-5308040-0 |
Rupture disc for PM 40 made of aluminium, | 419-5303445-0 |
Rupture disc for QX 20 / QX 22 made of Monel, | 419-5014410-0 |
Rupture disc Special PM 60 (reinforced), | 419-5303065-0 |
Rupture disc standard PH 30 and PL 100, | 419-5014616-0 |
Screw cap for CX 100 | 419-5004740-0 |
Set caps for CX 100-vessels | 819-5004730-0 |
Set caps for CX 100-vessels | 819-5004790-0 |
Set caps for vessels without pressure control | 819-5003540-0 |
Set caps for vessels with pressure control | 819-5003590-0 |
PL 100 Special lid with integrated TFM rupture | 419-5046170-0 |
Special lid with integrated TFM rupture | 419-5046180-0 |
tool kit CX-100 RPM-screw caps | 419-10000013-0 |
Vent-tube set 2 m | 419-5303227-0 |
Vent-tube set 4 m | 419-5303537-0 |
Connecting tube to gas collection system / | 419-5303508-0 |
CX 100 Vessel bottom made of TFM | 419-5003279-0 |
Vessel bottom PH 30 made of TFM | 419-5003605-0 |
PL 100 Vessel bottom made of TFM | 419-5003672-0 |
Vessel bottom PM 40 made of TFM | 419-5003447-0 |
Vessel bottom PM 60 made of TFM | 419-5003603-0 |
Weighing cup (2.0 ml, Set of 12 pieces) | 419-5303612-0 |
CX 100 Blind plug for turntable | 419-5302817-0 |
connection fitting for L100, PM60 | 419-5303566-0 |
Consumables CX 100 for vessels | 819-5303955-0 |
Consumables PL 100 | 819-5303953-0 |
Consumables PM 40 | 819-5303448-0 |
Consumables PM 60 | 819-5303952-0 |
Consumables set CX100 for vessel | 819-5303965-0 |
CX 100 ceramic pressure jacket (white-new) | 419-5303284-0 |
Evaporation unit CX 100 evaporation lid | 419-5303825-0 |
Nut for connecting tube | 419-5302811-0 |
Neutralisation Unit - for neutralisation of fumes | 819-5005055 |
Cap without pressure control | 419-5303563-0 |
* necessary to operate
Téléchargements
- Brochure speedwave XPERT (English) .pdf | 4.06 MB
speedwave XPERT is a universally applicable microwave digestion system for the preparation of organic and inorganic sample materials that impresses with its reliability, safety, and economy.